Product Description

LMD Single Flange Type Plum Elastic Coupling(GB/T 5272-2002)

♦Description
Plum elastic coupling has the characteristics of vibration reduction, buffering, small radial size, no lubrication, and easy maintenance. Suitable for starting frequency, positive and negative rotation, medium and low speed, medium and small power transmission.Not suitable for heavy loads and frequent replacement of elastic elements.

The structure of plum elastic coupling is simple. But when the elastic element is replaced, the half coupling shall be moved axially.LMS type easily replaces the elastic element without having to move the half coupling.

♦Basic Parameter and Main Dimension

Type	Norminal torque(Tn/N·m)		Speed(Np)		Shaft hole diameter (d1,d2,dz)	Length of the shaft hole			LO			D	D1	Type of elastic parts	Mass			Rotary inertia
	The hardness of elastic parts		LM	LMD, LMS		Y type	J1,Z type	L (recommend)	LM	LMD	LMS		LMD, LMS		LM	LMD	LMS			LM	LMD	LMS
	a/HA	b/HD				L
	80+5	60+5	r·min-1		Mm										kg				kg·m2
LM1 LMD1 LMS1	25	45	15300	8500	12,14	32	27	35	86	92	98	50	90	MT1-a  -b	0.66	1.21	1.33			0.0002	0.0008	0.0013
					16,18,19	42	30
					20,22,24	52	38
					25	62	44
LM2 LMD2 LMS2	50	100	1200	7600	16,18,19	42	30	38	95	101.5	108	60	100	MT2-a  -b	0.93	1.65	1.74			0.0004	0.0014	0.0571
					20,22,24	52	38
					25,28	62	44
					30	82	60
LM3 LMD3 LMS3	100	200	10900	6900	20,22,24	52	38	40	103	110	117	70	110	MT3-a  -b	1.41	2.36	2.33			0.0009	0.0571	0.0034
					25,28	62	44
					30,32	82	60
LM4 LMD4 LMS4	140	280	9000	6200	22,24	52	38	45	114	122	130	85	125	MT4-a  -b	2.18	3.56	3.38			0.002	0.005	0.0064
					25,28	62	44
					30,32,35,38	82	60
					40	112	84
LM5 LMD5 LMS5	350	400	7300	5000	25,28	62	44	50	127	138.5	150	105	150	MT5-a  -b	3.60	6.36	6.07			0.005	0.0135	0.0175
					30,32,35,38	82	60
					40,42,45	112	84
LM6 LMD6 LMS6	400	710	6100	4100	30,32,35,38	82	60	55	143	155	167	185	185	MT6-a  -b	6.07	10.77	10.47			0.0114	0.0329	0.0444
					40,42,45,48	112	84
LM7 LMD7 LMS7	630	1120	5300	3700	35*,38*	82	60	60	159	172	185	205	205	MT7-a  -b	9.09	15.30	14.22			0.5712	0.0581	0.571
					40*,42*,45,48,50,55	112	84
LM8 LMD8 LMS8	1120	2240	4500	3100	45*,48*,50,55,56	112	84	70	181	195	209	170	240	MT8-a  -b	13.56	22.72	21.16			0. 0571	0.1175	0.1493
					60,63,65	142	107
LM9 LMD9 LMS9	1800	3550	3800	2800	50*,55*,56*	112	84	80	208	224	240	200	270	MT9-a  -b	21.40	34.44	30.70			0.1041	0.2333	0.2767
					60,63,65,70,71,75	142	107
					80	172	132
LM10 LMD10 LMS10	2800	5600	3300	2500	60*,63*,65*,70,71,75	142	107	90	230	248	268	230	305	MT10-a  -b	32.03	51.36	44.55			0.2105	0.4594		0.5262
					80,85,90,95	172	132
					100	212	167
LM11 LMD11 LMS11	4500	9000	2900	2200	71*,71*,75*	142	107	100	260	284	308	260	350	MT11-a  -b	49.52	81.30	70.72			0.4338	0.9777		1.1362
					80*,85*,90,95	172	132
					100,110,120	212	167
LM12 LMD12 LMS12	6300	12500	2500	1900	80*,85*,90*95	172	132	115	297	321	345	300	400	MT12-a  -b	73.45	115.53	99.54			0.8205	1.751		1.9998
					100,110,120,125	212	167
					130,140,150	252	202
LM13 LMD13 LMS13	11200	2000	2100	1600	90*,95*	172	132	125	323	348	373	360	460	MT13-a  -b	103.86	161.79	137.53			1.6718	3.667		3.6719
					100*,110*,120*,125*	212	167
					130,140,150	252	202
LM14 LMD14 LMS14	12500	25000	1900	1500	100*,110*,120*,125*	212	167	135	333	358	383	400	500	MT14-a  -b	127.59	196.32	165.25			2.499	4.8669		5.1581
					130*,140*,150	252	202
					160	302	242

NOTE:
1. Mass and rotary inertia are the approximation calculated according to the recommended minimum axial hole.
2. Diameter of shaft hole with * can be used for Z – type shaft hole.
3. a.b is the code for 2 different materials and the hardness of elastic parts. 

♦Other Products List

Transmission Machinery  Parts Name	Model
Universal Coupling	WS,WSD,WSP
Cardan Shaft	SWC,SWP,SWZ
Tooth Coupling	CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK
Disc Coupling	JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling	LM
Chain Coupling	GL
Jaw Coupling	LT
Grid Coupling	JS

♦Our Company

HangZhou CZPT Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

 

♦Our Services
1. Design Services
Our design team has experience in Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2. Product Services
Raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→ Packing→ Shipping

3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4. Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5. Quality Control
Every step should be a special test by Professional Staff according to the standard of ISO9001 and TS16949.

♦FAQ
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of couplings.

Q 2: Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks in PDF or AI format.

Q 3: How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have a very good price principle, when you make the bulk order the cost of the sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 6: What is the MOQ?
A: Usually our MOQ is 1 pcs.

Q 7: Do you have inspection procedures for coupling?
A: 100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 9: What’s your payment?
A: T/T.  
 

♦Contact Us

Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

Key Features to Consider When Purchasing a Jaw Coupling

When purchasing a jaw coupling for a particular application, several key features and factors should be taken into account to ensure optimal performance and reliability:

• Material: Jaw couplings are available in various materials, including aluminum, steel, and stainless steel. The choice of material depends on the application’s specific requirements, such as environmental conditions, torque levels, and chemical exposure.
• Size: Jaw couplings come in different sizes to accommodate various shaft diameters. It is essential to choose the appropriate size that matches the shaft dimensions of the connected equipment.
• Torque Rating: Consider the torque requirements of the application and ensure that the selected jaw coupling can handle the expected torque levels without causing premature wear or failure.
• Speed Rating: Check the coupling’s speed rating to ensure it can handle the rotational speed of the application without generating excessive heat or vibration.
• Misalignment Capability: Assess the jaw coupling’s ability to accommodate angular, parallel, and axial misalignment between the shafts to prevent excessive stress on connected equipment.
• Backlash: Consider the level of backlash or play in the coupling. Low backlash couplings are suitable for precision applications, while higher backlash may be acceptable for general power transmission.
• Torsional Stiffness: For applications that require accurate motion control and minimal torsional wind-up, select a jaw coupling with adequate torsional stiffness.
• Environmental Factors: Consider the operating environment, including temperature, humidity, and exposure to chemicals or corrosive substances. Choose a coupling that can withstand the environmental conditions of the application.
• Installation and Maintenance: Check the ease of installation and maintenance requirements of the jaw coupling to ensure smooth integration into the system and reduce downtime during maintenance.
• Manufacturer Reputation: Purchase jaw couplings from reputable manufacturers known for producing high-quality, reliable products with a history of successful applications in various industries.

By carefully considering these key features, buyers can select the most suitable jaw coupling for their specific applications, ensuring efficient power transmission and reliable performance of connected equipment.

Can jaw couplings be used in heavy-duty applications such as mining and construction?

Yes, jaw couplings can be used in heavy-duty applications such as mining and construction, but their suitability depends on various factors. Jaw couplings are commonly employed in a wide range of industrial applications due to their versatility and ability to handle misalignment. However, when considering their usage in heavy-duty environments, several important aspects need to be taken into account:

1. Torque and Power Requirements: Heavy-duty applications often involve high torque and power demands. It is crucial to ensure that the selected jaw coupling is rated to handle the specific torque and power levels encountered in the mining and construction machinery. Choosing a coupling with a sufficient torque capacity ensures reliable power transmission without premature failure.
2. Material Strength: The materials used in the construction of jaw couplings play a critical role in their ability to withstand heavy-duty applications. Couplings made from robust materials, such as high-strength steel or alloy materials, are better suited for withstanding the demanding conditions found in mining and construction equipment.
3. Impact and Shock Resistance: Mining and construction applications involve significant levels of impact and shock loads due to the nature of the work. The jaw coupling must be designed to handle these dynamic loads without compromising its structural integrity. Some jaw couplings feature specially designed elastomers or flexible elements that provide additional shock absorption and reduce the transmitted impact forces.
4. Dust and Debris Management: Heavy-duty environments like mining and construction sites often contain high levels of dust, dirt, and debris. These particles can accumulate on the coupling surfaces and lead to premature wear and reduced performance. Selecting jaw couplings with appropriate sealing mechanisms or protective covers can help minimize the ingress of contaminants and extend the coupling’s life in such environments.
5. Maintenance and Inspection: Regular maintenance and inspection are crucial in heavy-duty applications to identify any signs of wear, misalignment, or damage to the coupling. Proper maintenance practices can prevent unexpected failures and ensure the equipment operates efficiently and safely.

When considering the use of jaw couplings in heavy-duty applications like mining and construction, it is essential to consult with coupling manufacturers or engineering experts to select the appropriate coupling type and size for the specific application. Some heavy-duty applications might require more specialized coupling designs, such as grid couplings, gear couplings, or disc couplings, which are explicitly engineered for extreme conditions and higher torque capacities. Additionally, following the manufacturer’s guidelines and recommendations for coupling installation, maintenance, and operating parameters is critical to ensure reliable and safe operation in heavy-duty environments.

Can Jaw Couplings Accommodate High Torque and High-Speed Applications?

Jaw couplings are versatile and can handle a wide range of torque and speed requirements. However, their suitability for high torque and high-speed applications depends on the specific design and material of the coupling.

Advancements in jaw coupling technology and the use of high-strength materials, such as steel and aluminum, have significantly improved their performance capabilities. For many industrial applications, jaw couplings can efficiently accommodate high torque and high-speed requirements.

When selecting a jaw coupling for high torque and high-speed applications, consider the following factors:

• Coupling Size: Choose a jaw coupling size that matches the torque and speed requirements of the application. Larger couplings with bigger spider elements can handle higher torque loads.
• Material: Opt for jaw couplings made from robust materials like steel or aluminum, which can withstand higher torque and speed without compromising structural integrity.
• Design: Some jaw coupling designs are better suited for high torque applications, offering increased torque capacity and better performance under heavy loads.
• Service Factor: Consider the service factor, which accounts for peak or intermittent loads, to ensure the selected jaw coupling can handle temporary torque spikes.

It’s essential to consult with coupling manufacturers or industry experts to determine the most suitable jaw coupling for specific high torque and high-speed applications. Properly sized and selected jaw couplings can provide reliable and efficient power transmission in demanding industrial scenarios.

editor by CX 2023-09-12