Worm Gear Quickness Reducers: Double Reduction
Ever-Power. manufacturers double double reduction gear reducer Reduction Worm Gear reducers that are designed to last. Double decrease units are created with the same top quality pieces as the single decrease Worm Gear reducers.
Double Decrease Worm Gear Speed Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or sturdy shaft input
Mix of two single reduction reducers
Solid or hollow outcome shafts available
Several varieties of bolt-on bases available
High tensile strength cast bronze worm wheel and a hardened and floor alloy steel worm made integral with the shaft for extended and trouble-free life
All cast iron construction
9 Versions: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Decrease Worm Gear Quickness Reducer Applications
Conveyors
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day delivery on stock products at no additional
cost
Twice reduction gearing mechanism is employed in enormous machinery and automotives where in the speed needs to be reduced at a needed level. For eg if the insight speed is certainly 2000rpm and the output quickness desired is normally 300rpm a reduction gearing system is used such as a reduction gear box. Yet, in case of double reduction mechanism, the reduction of speed occurs in 2 steps. In the beginning the input from the engine shaft has a pinion mounted onto it through couplings. This pinion equipment is then connected to an intermediate equipment which is first lowering gear. This gear is then connected to some other low rate pinion on another shaft. This low swiftness pinion is connected to the next reduction gear which is installed on the propeller shaft which is the output.
Greaves Double Reduction Acceleration Reducers are two stage worm reduction products. A specifically designed primary worm decrease unit is integrally attached on a typical single lowering Greaves worm reducer which forms the second stage. The composite products provide the most small and rigid set up for large reduction of speed necessary for slow going machinery. A broad range of ratios upto 4900:1 is available.
The wormshafts are constructed with top quality case hardening steeL accurately generated, ground and superfinished. The wormwheels include phosphor bronze centrifugally cast rims of substantial sections welded to rigid centres. Considerable overall flexibility of shaft layout is definitely permissible with all types of Double Reduction units
Ever-Power Double Decrease Worm Gearboxes will be two stage worm reduction units.
A specially designed primary worm reduction device is integrally mounted in a standard single reduction AGNEE worm gearbox which forms the second stage. The composite devices provide the most compact and rigid arrangement for large reduction of speed necessary for gradual moving machinery. A broad range of ratios up to 4900:1 is readily available.
Double Decrease Worm Gear Package Sizes Available around are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed certainly are a typical selection of commonly applied ratios from the entire range of Ever-Power Dual Reduction Worm Gear Box. Details of other ratios available on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Edition / Shaft Mounted Version / All sorts with motor installation adaptor /
motor – optional
The worm shafts are made of top quality case hardening steel, accurately generated, ground and super finished. The worm wheels include phosphor bronze centrifugally cast rims of substantial sections welded to rigid centers. Considerable versatility of shaft layout is certainly permissible with all types of Double Reduction devices.
Product Description
The products are widely applied in the creating equipments of all sorts of industries domestic and overseas. They will be the best alternatives for nowadays modern facilities of mechanical reducing travel control to realize large twisting distance, huge gear ratio, low sound, high proficiency and low temperature.
Description:
Customized top quality double worm gear speed reducer aluminium gearbox decrease gearbox with electric motor
Ratio:
7.5,10,15,20,30,40,50,60
Color:
Blue, Silver Or because customer’s requirements
Noise:
low noise (<50DB)
Advantage:
Great Efficience and low noise and low temperature
Material:
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, surface harness is 56-62HRC
Shaft-chromium steel-45#
Packing:
Carton and Wooden Case
Bearing:
C&U Bearing
Seal:
NAK SKF
Warranty:
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Usages:
Industrial Machine: Food Products, Ceramics, Chemical substance, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant:
Synthetic & Mineral