A chain and sprocket drive is a type of power transmission in which a roller chain engages with several toothed wheels or sprockets, used in engines as a drivefrom crankshaft to camshaft.
Ever-electric power is proud to share a wide collection of Sprockets along with our huge selection of agriculture, gardening, food preparation and outdoor products. We stand behind all 26,000 things we sell with this Satisfaction Guarantee. Customer Service may be the cornerstone of us business, and has been for over 50 years.
Ever-power travel sprockets provide tough, reliable service and show replaceable tooth plates for convenient field maintenance. Tooth plates for 102 and 142 series chain are available with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL and also the 175 and 260 series use our non-symmetrical profile.
Drive sprockets weren’t always made to be bolted on. At one time these were welded onto the final drive motor and had to be trim off if they were replaced. Sooner or later, welded-on adapters were set up that allowed the sprocket to always be bolted on, and newer designs use the bolted approach altogether.
When someone sends in your final drive motor for us to take a look at or?rebuild/reman, we advise them to remove the sprocket. We don’t require the sprocket in spot to evaluate the engine and the added weight (which can be significant) unnecessarily raises your shipping costs.
Signs of Sprocket Wear
The teeth on a drive sprocket are where you search for wear . They should be tall and smooth towards the end, not razor-sharp or dished at the end. And the sprocket, and more specifically its teeth, commence to wear, its size becomes scaled-down. This causes what’s referred to as a pitch mismatch, where in fact the tooth on the sprocket no more interact with the track links as effectively. This can accelerate the don of the sprocket and decrease the efficiency of your apparatus.
If your sprocket shows sign of excessive wear, then its time to displace it before it starts to cause abnormal track wear or begins to negatively affect the performance of your final drive engine.
Preventing Sprocket Wear
One of the key ways to prevent accelerated sprocket don is to check on the track tension. If the strain is too tight, it’ll cause wear on the sprocket teeth. We’ve talked before about the value of keeping the undercarriage clean, and the health of the undercarriage make a difference the track tension (especially if there is normally a build up of dried mud and debris). That’s the main purpose we put so very much focus on keeping the undercarriage clean
sprockets Conclusion
With out a functioning drive sprocket, your track drive won’t be able to propel your equipment. Fortunately, there are methods to help your travel sprocket last longer: keep the track pressure at an effective level and retain your undercarriage clean.
The undercarriage of your track machine should be inspected regularly. If you find early wear or harm to your tracks, a donned sprocket may be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the following Bobcat Compact Track Loaders: T180, T190, T550, T590
Parts can vary according to your serial number.
All Ever-ability sprocket tooth profiles are induction hardened to 55 Rockwell C., and are replaceable. The replacement and protection of tooth plate segments does not require removal of the travel shaft, bearings, etc. Ever-power also designs custom split hub pieces for retrofit applications that minimize field labor costs.
At first glance, you might think that if you’ve seen one drive sprocket, you’ve seen all of them. However, Ever-ability possesses added an I.D. lip and spiral band that captivate the needle bearing along with an exterior snap ring that enhances performance and reliability. While easy to overlook, it’s this attention to detail that the racer provides come to anticipate from Ever-power.
An We.D. lip and spiral ring that captivate the needle bearing
Exterior snap ring caps sprocket on drum & increases durability
CNC-machined teeth feature a corrosion-resistant finish
Chain Type: #219
Tooth Configuration: Standard