DUMP TRAILER Power UNIT-DOUBLE ACTING
Standard Description
This energy unit includes a energy up energy down circuit with load holding on both A & B ports. A stress compensatred movement handle can be extra to circuit to regulate the decent velocity from the cylinder.
Special Notes
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all of the hydraulic components concerned prior to set up of the energy unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which should really also be clean and totally free of impurities. N46 hydraulic oil is suggested.
4. The power unit need to be mounted horizontally.
5. Check the oil level in the tank after the first working of your energy unit.
six. Oil shifting is needed after the initial a hundred operation hours, afterwards after each and every 3000 hours.

DUMP TRAILER Electrical power UNIT- SINGLE ACTING
Standard Description
This energy unit includes a electrical power up gravity down circuit. Begin the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve can be offered if essential. Also a pressure compen sated flow handle can be additional to the circuit to regulate the descent velocity in the cylinder.
Remark: Please talk to our sales engineer for that various pump displacement, motor power or tank capacity.
Special Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean the many hydraulic components concerned prior to installation of the energy unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst,which must also be clean and cost-free of impurities.N46 hydraulic oil is recommended.
4. The energy unit really should be mounted horizontally.
five. Check the oil level in the tank after the initial running of your power unit.
6. Oil modifying is required just after the preliminary 100 operation hours, afterwards the moment each and every 3000 hours.