Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric engine, capacitor and quickness control change is still hooked up nevertheless the cord itself is normally detached as observed in the photos. (Discover “Control Notice” below for alter type.)
T (See “Application Notice” below for utilize in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” long with a collection screw clean. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to the next).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take electric fan motor china Notice: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). These two types of switches both control the engine just as (but you have a rotating knob and you have got a pull-chain). In the event that you order several motor at a time, we can do our better to supply your order with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric engine in a nonfan app. This is a completely enclosed fan electric engine and made to have continuous ventilation over the motor casing for cooling. The housing isn’t vented and the electric powered motor will overheat and get into automatic thermal overload if run in a nonfan plan where there isn’t solid ventilation past the engine. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans may possibly also overload the motor and cause it to proceed into automatic thermal overload. (Your lover blade from another producer may possess a steeper blade angle.)
Origin: This electric engine is manufactured in China.