• Engine gearboxes are maintenance-free, small power resources for driving vent, display screen, home and flap ventilation systems in greenhouses.
• Single phase and three phase choices for your individual needs.
• Key feature of the drives certainly are a self-braking worm equipment transmission and a built-in linear limit switch device.
shaft-installed gear Greenhouse Gear Motor motors are comprehensive electromechanical drives in which the speed of the installed electric motor is decreased to the required value using two to four reduction stages. The drives are powerful and durable and feature a concise and lightweight design.

The compact design is manufactured possible through the mixture of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent weight reduction compared to commercially offered drive motors. This is achieved through the consistent application of aluminum die casting technology, which ensures a high degree of rigidity for the gear and motor housing simultaneously.

Each drive is produced and tested specifically for each order and customer. A sophisticated modular system allows for an excellent diversity of types and a optimum amount of customization to client requirements.

Thanks to their integrated control devices, the shaft-mounted equipment motors are the ideal drives for applications in reversing setting. In both rotation directions, defined end positions are secured by two placement limit switches. This uncomplicated answer does not only simplify the cabling, but also makes it possible to configure the end positions efficiently. The high shut-off accuracy of the limit switches guarantees safe operation moving forwards and backwards.
This gearmotor integrates a gearbox, a power motor, and limit switches. It is connected with a steel shaft to turn the pinions for greenhouse ventilation. With the support of electrical panel, it could run and then stop after set amount of turns. Then it can open up and close the home windows for greenhouse ventilation to right positions.
To keep up the delicate environment in the greenhouse, climate control systems are a necessity. Many mechanical systems could be applied in this respect; however cup vent drive systems tend to be the most popular. The drive system includes a central gearmotor linked to a 40:1 correct angle reducer with dual output shafts. These OP shafts connect to long jack shafts that spread across the roof line of the greenhouse linking to multiple rack and pinion mechanisms that open and close large cup windows panes in the ceiling for temperature control.
According to the size of the application form (length of the shafting, amount and weight of the window panes) we provides two gearmotor solutions from a modified edition of their 200 series parallel shaft line – 1/5 HP and 1/20 HP. The application Is generally intermittent used; however the motors are ranked continuous because the glass pane windows could potentially be under continuous, subtle adjustment during the day.
Gear Motor, also called Electric motor Gearboxes, is a specific type of electrical motor that is designed to create high torque whilst maintaining a minimal horsepower, or low swiftness, motor output. Equipment motors can be found in many different applications, especially for the greenhouse, livestock and agricultural market, our motors are available options to operate roof vents, wall vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment mistakes and can be quickly taken out without disturbing the entire shaft.
shaft-mounted gear motors are total electromechanical drives where the speed of the installed electric motor is decreased to the desired value using two to 4 reduction stages. The drives are powerful and durable and show a concise and lightweight design.