We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For much more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
DeShi rubber slurry pump, the wet elements are made of anti-abrasive or anti-corrosive normal rubber, which
can be completely interchangeable with the steel parts. Consumers can choose various material parts
in accordance to the slurry liquid circumstances, such as R26, R33, R55, R42, R08, and so forth. Rubber lined slurry pumps
are a lot more suited in delivering high corrosive or abrasive slurries of little particle measurement without having difficult
or sharp edges.
Detailed Attributes:
1. EPT made for interchangeable damp areas with steel lined slurry pump.
two. Casing – Casing halves of ca EPT or ductile iron with exterior reinforcing ribs have the use liners and provide
higher operating strain abilities
three. Bearing assembly – A massive diameter shaft with quick overhang minimizes deflection and contributes to long
bearing daily life. Only 4 by way of bolts are needed to maintain the cartridge sort housing in the body.
four. Pump frame – A rigid, 1-piece casting cradles the “cartridge” shaft and bearing assembly. A minimum
quantity of by means of bolts maintain the pump casing to the frame. An straightforward means of external impeller adjustment
is presented in a hassle-free position below the bearing housing.
5. Impeller – EPT and rear shrouds have pump-out vanes. This layout minimizes recirculation and seal
contamination, Elastomer impellers are made from rubber coated high tensile metal, Cast-in impeller threads
require no impeller insert or nuts.
6. Liners – Rubber elastomer liners are interchangeable with hard steel. The elastomer liners are bolted,
not bonded, to the outer casing. Elastomer seal rings back all liner joints.
7. Shaft seal – Packing seal,Centrifugal seal, and Mechanical seal.
8. Driving sort – Adaptable coupling,V-belt with pulleys,Gearbox,VFD,S EPT handle and so forth.
9. The discharge branch can be oriented to any eight positions at the interval of 45 degrees
10. Effortless to put in and preserve in on-site application.
Design | Max Electrical power (Kw) |
Inlet & Outlet dimension (inch) | Substance for Use Areas | Movement Price (Q) | Head (H) meter |
Velocity (RPM) |
Impeller Dia. (mm) |
|
m³/hr | l/s | |||||||
25HS-B | 15 | 1.5/one | M | 12.6~28.8 | three.5~eight | six~sixty eight | 1200~3800 | 152 |
R | ten.8~twenty five.two | three~7 | 7~52 | 1400~3400 | 152 | |||
40HS-B | 15 | 2/1.five | M | 32.4~seventy two | 9~twenty | six~58 | 1200~3200 | 184 |
R | twenty five.2~fifty four | seven~15 | five.5~41 | a thousand~2600 | 178 | |||
50HS-C | 30 | 3/two | M | 39.6~86.4 | eleven~24 | 12~sixty four | 1300~2700 | 214 |
R | 36~75.six | ten~21 | 13~forty six | 1300~2300 | 213 | |||
75HS-C | 30 | four/three | M | 86.4~198 | 24~55 | 9~fifty two | 1000~2200 | 245 |
R | seventy nine.2~180 | 22~50 | 5~34.five | 800~1800 | 245 | |||
100HS-D | 60 | 6/4 | M | 162~360 | 40~a hundred | twelve~fifty six | 800~1550 | 365 |
R | 144~324 | forty~ninety | twelve~forty five | 800~1350 | 365 | |||
150HS-E | 120 | eight/six | M | 360~828 | a hundred~230 | ten~61 | five hundred~1140 | 510 |
R | 324~720 | ninety~two hundred | seven~forty nine | 400~1000 | 510 | |||
200MS-E | a hundred and twenty | 10/8 | M | 666~1440 | 185~four hundred | 14~sixty | 600~1100 | 549 |
200HS-ST | 560 | 10/8 | M | 612~1368 | 170~380 | eleven~61 | 400~850 | 686 |
R | 540~1188 | a hundred and fifty~330 | 12~fifty | 400~750 | 686 | |||
250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | 7~68 | 300~800 | 762 |
R | 720~1620 | 200~450 | seven~45 | 300~650 | 762 | |||
300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | thirteen~sixty three | 300~600 | 965 |
R | 1152~2520 | 320~700 | thirteen~44 | three hundred~five hundred | 965 | |||
350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | seven-hundred~1500 | thirteen~57 | 200~four hundred | 1370 |
25HHS-C | thirty | one.5/1 | M | 16.2~34.2 | four.5~9.five | twenty five~92 | 1400~2200 | 330 |
50HHS-D | 60 | 3/two | M | sixty eight.4~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
75HHS-E | a hundred and twenty | 4/three | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
100HHS-E | 120 | six/4 | M | 324~720 | 90~200 | 30~118 | 600~1000 | 711 |
150HHS-S | 560 | eight/six | M | 468-1008 | 130~280 | 20~ninety four | 500~1000 | 711 |
For the material of wearing components,
“M” = metallic, extremely chromium alloy
“R” = anti-abrasive rubber
Get in touch with
Welcome to make contact with us any time for particulars.
Your inquiry will get our prompt attention and reaction !
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first products manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our firm and the detailed substitute components contained herein are not sponsored, accepted, or created by the OEM.