Single and double reduction planetary gear drives to be used with electric, hydraulic, air flow motors or mechanical power insight from high swiftness, low torque sources to deliver reduced speeds at increased torques. The input part has regular SAE pads for engine mounting. Available in the three output configurations proven below. Many units can be furnished with an integral parking brake.
Solitary reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input quickness is bound to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque rankings to about 1/3 to 1/2 the values shown. Models provide 95% power transmitting efficiency.

Wheel Drive
Input side has standard SAE pads and hydraulic planetary drive splined insight. Output side has hub for installation vehicle wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature can be standard on all wheel drives.

Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined input. Output side includes a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel has extra-large tapered roller bearings, a ductile iron hub and warmth treated ring equipment to minimize backlash growth caused by wear. The exterior bearing nut provides the greatest in shaft retention and shaft strength. Output could be a spindle shaft or various sizes of essential pinion gears.