Small Precison Worm Decrease Gearboxes
There are a variety of specifications you will have to consider when coming up with a worm gearbox selection.
First, what is the insight and output torque requirements? Next, examine vendor horsepower/torque charts and select the correct worm gear reducer.
If how big is the gearbox will be an important consideration after that check the reducer dimension specifications, not all manufacturers make compact units. In fact, working with the proper supplier can help you not only find the right gear reducer but also prevent some of the most typical errors in reducer selection. We offer a free guide to help you find the appropriate supplier to utilize.
For low and fractional horsepower program we offer two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major differences between both of these models. Both feature the hollow or solid output shaft. Both versions are compact and offer users a wide range of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your particular application or task is vital to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes at the top and bottom
• Flush fitting bearing caps easy to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Correct Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is necessary. This right angle equipment motor is so versatile it could work just about anywhere.
Features & Options
Double Shaft or Solitary Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power has designed and built unique, high accuracy mini gearboxes that can’t be found anywhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that were created and built to meet your specific specifications.
Contact us for the mini gearbox the application requires, or demand a quote on a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also known as reducers, gear reducers, speed reducers, gear drives, and gearmotors. All terms can be used pretty much interchangeably. Please note that the links for our little gear drives include info on the full range of framework sizes for that series or design.
Bevel Box Micro Gear Drive
Our bevel container miniature gear drives are program rated for the optimum balance of functionality and price. Torque could be balanced to meet your RPM and working life requirements. Light-weight with low backlash functionality (less than 1°, with option of 1/2”).
Output torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a concise package. They offer an output shaft at 90° from the input, and are available in equipment ratios from 1:1 to 40:1. Lightweight but durable, with machined aluminium housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc a few minutes of backlash or better. Also called “shaft to bore gearboxes,” the unit provide a single insight shaft that protrudes from opposite sides of the housing; output can be a keyed bore. Standard solitary- and double-end shafts can be found and given keys and retainer rings. An array of gear ratios and insight sizes are offered to meet up your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Obtainable in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and long lasting lubrication. They provide two insight shafts on opposite sides of the body, with two output shafts perpendicular to the input shafts. Our mini 4 shaft worm gear drives deliver high performance overall performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes generate an output at 90° from the insight. They deliver superior overall performance in an amazing array applications and are constructed with little footprints, making them well suited for procedures where space is limited. They offer high performance with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and are rated for speeds up to 3,000 RPM. Light weight aluminum housings and stainless gears and shafts make these inline spur gearboxes difficult and corrosion resistant, for your the majority of demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm equipment reducers deliver excellent performance with high efficiency, and feature rugged building for challenging power transfer functions. Available in three gear ratios (5:1, 10:1, 20:1), our small worm gearboxes are built in extremely small footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and produce a custom miniature gearbox to meet up your unique specs. We can produce custom micro gearboxes in any configuration the application requires, with result torque amounts as high as 900Nm. We can work from your gearbox styles, reverse engineer a preexisting unit, or help you develop an all-new style that delivers the performance you will need. Request a quote on a customized miniature gearbox or e mail us to discuss your specific requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and output shafts with drive essential and retainer rings can be supplied to your specifications for any of our hollow bore miniature gearboxes. We offer a fundamental selection of solitary ended or double ended shafts to assemble in these gearboxes. All gearbox shafts are supplied with keys and retainer bands.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our app engineers to discuss your unique needs.
We offer a broad selection of misalignment shaft couplings in inch and metric bore sizes. ” and metric precision surface shafts can be found from stock.
Contact Us for POWERFUL Miniature Gearboxes
We will be the miniature gearbox specialists. All of our micro gear drive versions deliver superior performance in a little footprint, and are durable enough for challenging function environments. E mail us to find out more about our mini gearboxes, or demand a quote on a custom model that’s tailored to your needs.
Additional benefits of worm drive gearboxes include: