General Description
Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is designed to operate materials managing gear. The reducing motion is achived by the solenoid valve using the decreasing speed managed by an adjustable needle valve. The left and proper functions are outfitted having a dual pilot operated 
check out valve and cross-over relief valves.
Remark: Please talk to our income engineer for the unique pump displacement, motor power or tank capability.
Special Notes
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned prior to installation of the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which must also be clean and no cost of impurities.N46 hydraulic oil is recommended.
4. This energy unit needs to be mounted horizontal.
5. Check the oil degree during the tank just after the first start out of your electrical power unit.
6. Oil transforming is needed after the original a hundred operation hrs, afterwards as soon as just about every 3000 hours.
