This standard selection of Servo-Worm Reducers are ideal for use in applications that demand powerful, precise positioning and repeatability. They were specifically developed for use with state-of-the-art servo engine technology, providing tight integration of the motor to the machine. Angular backlash of less than 1 arc-moments is provided standard.
They are available in four sizes (50 mm to 100 mm center distance) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of engine couplings and installation flanges are available for assembly to virtually all servo motors, and the hollow bore result can be used to mount output shafts, pinion shafts, or other drive elements.
Normal applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and electronic line shafting. Industries offered include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors have a torque selection of 92 Nm to 520 Nm. As angular drives they are specially space-saving and reduce the expenditure for valuable installation space.
The helical-worm servo gearmotors were created so that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you exceptional attenuation properties for the operation of your systems with low degrees of vibration. This is usually because of the longitudinal app of power on the input shaft. This enables torque impulses to end up being prevented effectively and for optimum results when it comes to running smoothness and sound reduction to be performed.
Both the gear unit, and the synchronous servomotor are based on our modular system. This allows you to have fully individual configuration opportunities for every application. One point is certain – Our servo gearmotors are genuine specialists for very specific requirements.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, quickness reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement when a equipment in the kind of a screw, also referred to as a worm, meshes with a worm gear. These gears are typically made from bronze and the worms are steel or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A main benefit of worm equipment reducers can be that they produce an output that’s 90° from the insight and can be utilized to transmit higher torque or decrease rotational speed. Frequently, a worm gearbox has right hand threads; to improve the path of the result, a left-hands thread worm gearbox is required.
At times a motor’s capability could be limited to the main point where it needs gearing. As servo producers develop more powerful motors that can muscle applications through more difficult moves and create higher torques and speeds, these motors need gearheads add up to the task.