worm gear speed reducer
One reduction worm gearing offers high ratio reduction with couple of shifting parts in a close-coupled compact drive. The right angle arrangement of driving-to-driven machine takes a minimum of space. Input and output shafts can be prolonged in either or both directions in horizontal or vertical arrangements adaptable to any installation requirement. Efficient engine speeds are decreased to gradual speed requirements of several industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Encounter Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive usage of the involute Helicoid Thread form (with departing side contact) on the worm and gear offers high efficiencies, and long service lifestyle. The hardened ground and polished alloy steel worm develops a even, work hardened surface area on the bronze equipment. For this reason worm gears wear in and improve with prolonged service while other gears are wearing out. Ever-Power offers a wide collection of model configurations, sizes, ratios, and accessories from our standard products.
Fabricated Designs
If the application involves serious shock loads or possible housing damage from external sources (as in steel mills or mobile gear applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide optimum rigidity and strength that allows the transmitting of higher horsepower amounts than are possible with standard cast iron products. Extra heavy side plates connect the worm and gear shaft bearing facilitates, assuring correct meshing of the gear under all load conditions. In smaller sizes, fabricated metal reducers are interchangeable with Ever-Power standard cast iron reducers.
Custom Designs
Ever-Power can offer custom swiftness and reversed engineered reducers for your application, be it a fresh project or a direct drop-in replacement for a competitor’s speed reducer. Fabricated metal reducers allow Ever-Power to match a competitor’s footprint, centerline, and shaft height allowing a primary drop-in alternative saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are manufactured from phosphorous bronze. Our style also includes a hardened, floor and polished alloy metal worm. This combination develops a clean, work-hardened mating surface area of the bronze equipment which increases with prolonged service.
Worm gearing is a class of gear reducers that utilizes correct angle, nonintersecting shafts. This form of reducer provides clean and quiet procedure and permits the possibility of large quickness reductions. These gears are available from share in a wide selection of ratios, from only 4:1 up to 3600:1. The compact design and construction allows worm gear reducers to be placed in a relatively small space. Thus, very high reductions in a restricted package size may be accomplished with this configuration. Our worm equipment features the constant sliding tooth action between worm and the teeth. This increases the tolerance for large loads and shock loads. Worm gear drives offer users high reducing convenience of relatively low cost in comparison with some other types of gearing.
The utilization of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that make use of worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm equipment reducer gearbox series foundation on years of encounters uses designed teeth surface with unsurpassed torque transfer performance with great efficiency, efficency and price.Worm gear system transmits power through sliding get in touch with, resulting in extremely low vibration , sound, little backlash and self-locking property
-Housing:One time we casting creats great rigidity for serious impacts. Outer cooling fins and internal lubrication essential oil diversion channel style to improve heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to make sure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm equipment reducer is one type of reduction gear container which consists of a worm pinion insight, an output worm equipment, and includes a right angle result orientation. This type of reduction gear package is generally used to take a rated motor speed and create a low speed result with higher torque value based on the reduction ratio. They often can resolve space-saving problems since the worm equipment reducer is among the sleekest decrease gearboxes available due to the little diameter of its result gear.
worm gear reducerWorm gear reducers are also a favorite type of acceleration reducer because they provide the greatest speed decrease in the tiniest package. With a higher ratio of speed reduction and high torque result multiplier, it’s unsurprising that many power transmission systems make use of a worm equipment reducer. Some of the most typical applications for worm gears are available in tuning instruments, medical examining equipment, elevators, protection gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission provides two sizes of worm gear reducer, the SW-1 and the SW-5 and both can be found in a variety of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both these options are produced with rugged compression-molded glass-fill polyester housings for a durable, long lasting, light-weight speed reducer that is also compact, noncorrosive, and nonmetallic.
Features
Our worm gear reducers offer a choice of a good or hollow result shaft and show an adjustable mounting placement. Both SW-1 and the SW-5, nevertheless, can withstand shock loading better than other reduction gearbox designs, making them ideal for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Equipment Reducers also known as worm gearbox or worm velocity reducers. Worm gear reducers are utilized for speed decrease and increasing the torque for electrical motor drives. You can choose to attach your NEMA electric motor to the reducer by using the NEMA C face flange or use a coupling. If you need a coupling for the result or input shaft see our coupling section for choosing the coupling. You can expect four assemblies left hands and right hand and double result shaft and shaft insight and shaft result. Interchangeable with many worm gear manufactures. See data sheet in item overview for diamensions. If you don’t see your type, make sure you Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear speed reducers can be found in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes available on request). Output torque ranges from 33,000 in lbs. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are well suited for water/waste-water equipment drive applications such as for example thickeners and clarifiers, which require a vertical straight down shaft. Other offered configurations also make Ever-Power triple reduction reducers perfect for use on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or materials handling systems where large torques/slower speeds are needed.
These reducers are also available with a helical major reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM only 0.01 with a 1750 RPM input.
Ideal for ultra-slow swiftness, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are found in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive models are 56C or 145TC flange attach with either right, still left or dual result shafts or a hollow bore result. The indirect drive models are shaft input-shaft output boxes for use with sprocket or pulley drive systems. They provide an effective low cost solution to speed reduction and improved torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will have to determine the mandatory torque and support factor for the application. Click on “Specs” above for a table that will aid in identifying the service aspect. For service elements above 1.0, multiply the required torque by the support factor.
Our regular 700 Series – the heart of Ever-Power velocity reducer product line – has been serving industry reliably for over 40 years. Its verified modular style has set the industry standard for overall performance and is the most imitated item in today’s worm gear swiftness reducer marketplace. But why settle for a knock-off when you’re able to have the original – from Ever-Power.
Specifications
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting versatility permits installation in virtually any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, and also greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without exterior ribs, is made of close-grained cast iron and for rigid gear and bearing support. In addition, it offers excellent temperature dissipation.Dual lip, spring-loaded seals protect from oil leakage and prevent dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon steel shafts for greater strength.High tensile strength cast bronze worm wheel and hardened and ground alloy steel worm made intregal with the shaft for long and trouble-free life.Oil sight gauge for simple maintenance (unavailable upon sizes 25 and 34).Factory oil stuffed.Every unit test run prior to shipment.Universal mounting with bolt-on foot.Highly modifiable design.All this at substantially reduced prices than you have already been accustomed to paying for reducers of lesser quality. Less

Click to watch independent testimonials about worm gear speed reducer.