Worm drive gearbox with motor
A robust worm-travel gearbox powered by an MM28 engine. Ideal applications where an easy to fit, high torque productivity is required. Ideal for student based jobs which includes robots and buggies.
The machine has been designed so that the output shaft could be ‘clicked’ in and out for modification. E.g. reducing to size. The motor is snap fitted into its cradle to engage the gear and worm.
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for little walking robots, lifting mechanisms, and other applications where great torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to a few amps, making them perfect applicants for the DRV8833 motor driver carrier. Electric motor overheating can be due to excessive stalling, actually at very low voltages. We recommend that you utilize stall-detection sensors, or simply see your robot, to make sure that it doesn’t stall for more than a few seconds at the same time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also suits on the smaller threaded end of the shaft, although it is not particularly designed to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors will be economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical correct position worm geared motors arranged new criteria for reliability, effectiveness and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly style offers easy integration right now and a truly future proof remedy. The Ever-Power gear electric motor offers total flexibility in mounting options includes shaft, base, face, and flange solutions. The motor terminal box can be mounted in substitute positions rotated in 90º steps around the engine frame offering for unparalleled integration options.
Ever-Power gear motors adhere to UNITED STATES and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total solution for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be used outdoors or in wet and dusty environments without the utilization of additional enclosures. Full rated output is offered by the output shaft of the machine.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connecting with Connect connectors.
With included inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the remedy for applications requiring a good corner turn, optional dual output, or an inability for the electric motor to be back again driven. The DC correct angle equipment motors are designed for continuous and intermittent duty operation. Our right angle equipment reducers were created with many mounting plate options, making them perfect for a number of DC electric motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are created to generate high torque in a small package size. Worm Gear Motors are excellent for applications that require a personal- locking or breaking characteristic since the result shaft can’t rotate when there’s no power applied. Also, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Products has a DC Worm Equipment Motor solution for your application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
Protection Door Locks / Industrial Conveying Devices / Security Gates / Dental care Chairs / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with among our Worm Gearheads. EP Products will work with you to create and manufacture a Worm Gear Engine that may optimize the overall performance of your unique application.
Built to your specific requirements
Motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm electric motor runs on the metal gear box for sturdiness and a higher torque output. Because of the special mechanical structure of the worm drive the motor output shaft is certainly self locking and may not be rotated.
This part runs on the two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and can achieve 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially show their strength in applications where high gear ratios are essential. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Our worm geared motors have a higher overload capacity
Washdown versions enable simple and effective cleaning of the drive system.
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Our modular design give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each of these has its own unique requirements. The EP series worm gear motors can be quickly and efficiently adapted to fulfill your needs.
Worm gear products impress with their superior power density and compact design. If required, we can also source them with the highly effective nsd tupH surface area treatment.
As well as the basic EP casing, we offer an extensive line of bolt-on elements to customize the merchandise including torque arms, shaft addresses and output flanges. These can be easily field installed, but we will also be glad to assemble the individual components for you.
Discover more about our modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm equipment unit SMI
SMI worm gear units feature a smooth, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes this product ideally suited for severe and demanding industries like meals processing and pharmaceuticals.
Versatile input designs such as NEMA, IEC or direct motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units possess on all sides diverse fixing possibilities and enable a simple assembling for the client.
Additional drive configurationscan be created by use of built-in add-ons (e.g. torque arm and result flanges). The housings are made in light weight structure out of aluminium die cast. Motor attachment is realised in general by means of IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Travel Gearbox with Electric motor – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm simply no load swiftness, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm large, 40mm high, a robust worm get gearbox powered by an MM28 electric motor (included), most ideal for applications where an easy to fit, high torque end result is necessary, nylon housing and equipment, requires light oil or perhaps silicon grease lubrication, ideal for student based projects including robots and buggies.
Most ideal for applications where a simple to fit, high torque end result is required
Ideal for student based tasks including robots and buggies
Reversible Large torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible Large torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
The engine is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared engine with self-lock, that is, regarding motor without electric, the productivity axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole engine output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Application: open the home window, door, Mini winch. Ect.
In sumo robot or combat robot competition where huge holding torque’s engine is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option when compared to spur gear motor. How come worm gear so special? Check this wiki out: Worm Drive.
“Unlike with ordinary gear trains, the direction of transmission (input shaft vs result shaft) isn’t reversible when working with large reduction ratios, due to the better friction involved between your worm and worm-wheel, when usually a single start (1 spiral) worm is used. This can be an advantage when it is desired to eliminate any probability of the result driving the input.”
In other words, it is difficult to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Have a look at some important, valuable posts regarding worm motor.