Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 electric motor. Ideal applications where a simple to match, high torque output is required. Ideal for student based projects including robots and buggies.
The machine has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The engine is snap fitted into its cradle to activate the apparatus and worm.
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for little strolling robots, lifting mechanisms, and various other applications where high torque is usually desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draft to some amps, making them ideal candidates for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, even at suprisingly low voltages. We recommend that you use stall-detection sensors, or simply watch your robot, to make sure that it doesn’t stall for more than a few seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on small threaded end of the shaft, though it is not specifically intended to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors established new criteria for reliability, effectiveness and economic climate with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly design offers easy integration now and a really future proof option. The Ever-Power gear motor offers total versatility in mounting choices includes shaft, base, face, and flange solutions. The electric motor terminal box can be mounted in choice positions rotated in 90º steps around the electric motor frame providing for unparalleled integration opportunities.
Ever-Power gear motors comply with UNITED STATES and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total solution for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be utilized outdoors or in wet and dusty conditions without the utilization of additional enclosures. Complete rated output is available at the result shaft of the machine.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the remedy for applications requiring a part turn, optional dual output, or an inability for the motor to be back again driven. The DC right angle gear motors are designed for continuous and intermittent duty operation. Our right angle gear reducers were created with several mounting plate choices, making them perfect for a variety of DC motor based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are made to generate high torque in a small package size. Worm Gear Motors are excellent for applications that want a self- locking or breaking feature because the result shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Items has a DC Worm Equipment Motor solution for your application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Decrease Ratios
Security Door Locks / Industrial Conveying Systems / Security Gates / Teeth Seats / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with among our Worm Gearheads. EP Items will work with you to create and produce a Worm Gear Electric motor which will optimize the overall performance of your specific application.
Built to your unique requirements
Electric motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm electric motor uses a metal gear box for strength and a higher torque output. Due to the special mechanical structure of the worm drive the engine output shaft is definitely self locking and can not be rotated.
This part uses a two wire connection and supports direction control and also PWM speed control. Ranked voltage is 12v and will accomplish 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially show their strength in applications where high equipment ratios are necessary. Our worm geared motors are for that reason optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Our worm geared motors have a higher overload capacity
Washdown versions allow simple and efficient cleaning of the drive program.
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Our modular style give users maximum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each of these has its unique requirements. The EP series worm gear motors could be quickly and efficiently adapted to fulfill your needs.
Worm gear products impress with their high power density and small design. If required, we can also supply them with the impressive nsd tupH surface area treatment.
In addition to the basic EP casing, you can expect an extensive line of bolt-on worm motor components to customize the product including torque arms, shaft covers and output flanges. These could be very easily field installed, but we will also be glad to assemble the average person components for you.
Find out more about the modular SI worm geared motors!
Find out more
Easy and Clean: The EP worm equipment unit SMI
SMI worm gear systems feature a easy, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes the product ideally suited for severe and challenging industries like meals processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or direct motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides different repairing possibilities and enable a simple assembling for the client.
Other drive configurationscan be created by use of built-on accessories (e.g. torque arm and result flanges). The housings are created in light weight building out of aluminium die cast. Motor attachment is realised generally through IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Engine – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm no load acceleration, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 electric motor (included), most suitable for applications where a simple to fit, high torque result is required, nylon housing and equipment, requires light essential oil or silicon grease lubrication, well suited for student based projects including robots and buggies.
Most ideal for applications where an easy to match, high torque output is required
Ideal for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
The electric motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared electric motor with self-lock, that’s, in the case of motor without electric, the output axis is certainly fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole engine output shaft relatively-short than general gear engine, widely used to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Application: open the window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm gear is certainly a better option when compared to spur gear motor. How come worm gear so unique? Take a look wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the path of transmission (input shaft vs output shaft) isn’t reversible when using large reduction ratios, because of the higher friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm is used. This is often a advantage when it is desired to eliminate any probability of the result driving the input.”
In other words, it is tough to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Worm drive gearbox with motor