Our regular 700 Series – the heart of Ever-Power quickness reducer products – has been serving industry reliably for over a decade. Its proven modular design has set the market standard for efficiency and is the most imitated item in today’s worm gear swiftness reducer marketplace. But why accept a knock-off when you’re able to have the original – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility allows for installation in virtually any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, as well as greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Ever-Power worm gearboxes possess earned a popularity to be an industry benchmark worldwide. Our achievement came from our relentless drive for quality with state-of-the-artwork technology, all while offering worm gearboxes are affordable prices. High flexibility accorded through a wide choice of mounting choices, shaft configurations and motor interfaces, makes the Ever-Power worm gearbox the default choice for the industry. The helical-worm and the double-worm version, with or without the torque limiter, add up to the advantage, creating an extremely versatile drive system.
Ever-Power Worm gearboxes provide high torque with low swiftness gear ratio. Being simple and compact in design, these gears can perform higher gear ratio than the helical gears. These worm reduction gears having screw type characteristics are similar to helical gears, but its helix angle is typically comparatively bigger) and its own body is generally quite long in the axial path. The gears in these gearboxes could be correct or left-handed depending upon the purpose.
Mounting choice include universal housing, aspect flanges, foot (horizontal and vertical), shaft mounted with torque arm. Available in Solid shafts (one or dual), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear composed of a worm shaft and worm wheel. The worm is certainly shaped just like a screw and the worm wheel is definitely a type of gear machined to get a tooth profile with the same configuration.
The operation of a worm gear is similar with that of a bolt and nut. The principle is equivalent to a nut that has been fixed so that it cannot rotate and therefore progresses in the axial path when the bolt can be turned.
The look of a worm gear is thought of through the relationship between the rack and spur gear on the center plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel by one tooth. Due to this, in a 1 speed reduction gears, the wheel could be manufactured so that it will be rotated 1/60 (1/120 in special applications).
Orthogonal shaft The shafts are aligned orthogonally due to the structure. This feature makes it possible to layout the turning transmission direction at the right angle.
The arbitrariness of the rotation direction The screw direction of the worm can be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation path of the worm wheel by changing the screw path.
A multitude of shaft layouts The wide variety of shaft layouts is one of the features of interlocking gears.For example, right shaft output, still left shaft output, dual shaft input and dual shaft output, etc., combine for a total of 14 types (Shape 2) and, if attachment orientations are included, it is possible to pick from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is usually characteristic because the contact can be linear and the relative slide is excellent. In comparison to rolling power transmission, noise and vibration are extremely low. For this reason, this technology is used to drive medical gear, elevators and escalators, etc.
The primary specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1～1(at an input of 1800 rpm)
Output torque(N・m) 20～66
Input speed(rpm) 0～1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4～30(at an input of 1800 rpm)
Output torque(N・m) 900～3570
Input speed(rpm) 0～1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3～255(at an input of 1800 rpm)
Output torque(N・m) 50～56600
Input speed(rpm) 0～1800
Key points when choosing a worm reduction gears
Selection
When selecting a worm reduction gears, the procedures for selecting the right gear are described in the manufacturer catalogs and the series and models ought to be selected according to those procedures. Particular care should be taken in key areas such as selecting the load index, calculating the overhang load and examining heat rated capacity from the manufacturer.
Cautions during use
When utilizing a worm reduction gears, the heat produced during the initial period of make use of is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently achieving the performance of the worm decrease gears.
Maintenance and inspection
After completing running-in operation (approximately 50 hours), it is necessary to change the lubricating oil and also to change the lubricating oil after that about 1 time each year according to the procedure manual provided by the manufacturer.
Product Description
The Worm Decrease Gear Box is provided by our company is of high-quality. Our products are made through the use of premium quality material and advance technology at our vendors end. These are widely used in a variety of sectors. Our products are often available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A-160 B5 Body, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Mount.
High efficiency and safe operation. High load capacity and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox result speed (rpm).
Higher ratios available on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the industry worldwide. They succeeded in merging uncompromising quality with stateoftheart technology amd renown cost effectiveness.Absolute flexibility is distributed by the wide choice of several installation options, shaft configurations and electric motor interface, all offered as standard. The helicalworm and the doubleworm edition, with or without the torque limiter, also accumulate, creating an extremely versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 level C TO 80 degree C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears come in two series: X and H.
The series X, featuring a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell housing + coupling) offers great versatility to suit a broad selection of applications and higher efficiency than the compact series XC, where the emphasis is on space efficiency.
Series H supplies the same features because series X with an added plus: a spur equipment pre-stage at the input end provides higher overall performance and a broader selection of ratios compared to the X series.
Framework sizes 110 and 90 include a cast-iron housing cast enbloc, whereas smaller sizes use die-cast aluminium housings. The worm shaft is produced from casehardened and hardened alloy steel and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow result shaft is supplied as standard.
Broad range of possibilities:
second input, output flange, single or double extension result shaft, torque limiter with through cable, torque arm.